HOW TO CARE FOR YOUR SALT AND PEPPER MILLS
Robert Welch salt and pepper mills feature a fully adjustable CrushGrind® mechanism. The ceramic mechanism delivers unrivalled levels of precision and can grind salt, pepper or dried herbs and spices.
REFILLING THE MILLS
1 - Remove the top while holding the base firmly on the table, to prevent any peppercorns or salt being spilt.
2 - Simply choose the way you prefer to refill:
- Use a cupped hand
- Use a spoon or scoop
- Use a paper funnel
3 - Push the top back on firmly.
REFILLING THE MILLS
1 - Remove the top while holding the base firmly on the table, to prevent any peppercorns or salt being spilt.
2 - Simply choose the way you prefer to refill:
- Use a cupped hand
- Use a spoon or scoop
- Use a paper funnel
3 - Push the top back on firmly.
ADJUSTING THE COARSENESS
Rotate the grey adjusting wheel to achieve the desired result: course / fine.
SIMPLE STEPS TO CLEANING THE CERAMIC PART OF THE MILL
1 - Unscrew the grey adjusting wheel.
2 - Take out the ceramic cone.
3 - Wipe the loose dust from the cone with a cloth or brush.
4 - Wash the cone in water.
5 - Wipe and leave to dry thoroughly before replacing.
OTHER TIPS:
1 - Store in a dry place.
2 - To protect the grinder mechanism, do not grind over open cooking pots. (If the mechanism does get clogged, empty and clean.)
3 - Clean thoroughly between using for different seasonings.
SIMPLE STEPS TO CLEANING THE CERAMIC PART OF THE MILL
1 - Unscrew the grey adjusting wheel
2 - Take out the ceramic cone
3 - Wipe the loose dust from the cone with a cloth or brush
4 - Wash the cone in water
5 - Wipe and leave to dry thoroughly before replacing
OTHER TIPS:
1 - Store in a dry place.
2 - To protect the grinder mechanism, do not grind over open cooking pots. (If the mechanism does get clogged, empty and clean.)
3 - Clean thoroughly between using for different seasonings.
SHOP PRODUCTS:
Sold out
Sold out
Sold out